Solar panel system

Solar Panel Cleaning Robot- Suitable for Various Solar Arrays

After the completion of the solar power plant, the cleaning of solar panels is a part of the maintenance of the solar system. With the continuous increase in solar installation, this demand is also becoming more apparent.

1 

The surface of solar panels is mostly made of tempered glass material. Although tempered glass has high strength, it is not acid or alkali resistant. When encountering wet acidic or alkaline dust for a long time, the glass surface will be corroded. At the same time, due to the reflection, scattering, and absorption of solar radiation by the dust on the surface of the module, it will reduce the transmittance of the sun, reduce the solar radiation received by the panel, and subsequently reduce the output power.

2 

The cleanliness of the solar panel largely determines the efficiency of power generation. Data shows that the cleaned solar panel can increase its power generation efficiency by 20-30%. Therefore, cleaning solar panels has become an important aspect of solar system maintenance.

3 

Traditional solar cleaning method mainly are dry cleaning or water washing by manual, or by using high-pressure cleaning vehicles. It is difficult to clean, inefficient, and costly, and can easily cause water resource waste and damage solar panels.

4 

Multifit Solar had developed many different kinds of cleaning robots suitable for different kinds of solar arrays. It’s included Tracing Robot, Rail-Type Full Automatic Cleaner Car, 4-Wheel Drive Robot, Crawler-Type Robot. Our intelligent cleaning robot can automatically detect, track, locate, communicate, and control groups, meeting the needs of various equipment control and management.

6 

These robots not only can perform regular automatic cleaning without manual duty, but also operates at night with a freely set frequency. The solar panel can be cleaned regularly according to the site environment, and can thoroughly remove dust and dirt on the surface of components to improve power generation efficiency.


Post time: May-12-2023

Leave Your Message