Rooftop solar grid-connected power generation system. The system is directly incorporated into national grid, without battery, charge of connected grid application paid by buyer. After successful installation of grid grid connected, in addition to household spending deduction, subsidies can be obtained as power degree. In assition, when electricity can't be used up, the state grid will repurchase it at local price.
Its operation mode is under the condition of solar radiation, the solar cell module array of the photovoltaic power generation system converts the solar energy into the output electricity, then,it is converted into alternating current from the grid-connected inverter to supply the building's own load. The excess or insufficient electricity is regulated by connecting to the grid, and the excess electricity can be sold to the country.
The system is independent of each other and can be controlled by itself to avoid large-scale power failure and high safety.
Easy installation and simple operation.
Make good use of idle roof resources to generate additional revenue.
Not only can they get government subsidies, but they can also sell excess electricity to grid companies.
Used to buy electricity with money, now take the surplus electricity to sell for money.
1. The system is independent of each other and can be controlled by itself to avoid large-scale power failure and it is high safety.
2. Make up for the lack of stability of the power grid, and continue to supply power when accidents occur, it has became an indispensable and important supplement of centralized power supply.
3. It can monitor the quality and performance of regional power in real time, which is very suitable for supplying power to residents in rural areas, mountainous areas, pastoral areas, developing large, medium and small cities or business districts, greatly reduce the pressure of environmental protection.
4. Transmission and distribution loss is low or even no, users don't need to build distribution power station, it reduce or avoid additional distribution costs, civil construction and installation cost is low.
5. Good peak regulating performance and simple operation.
6. Due to the few systems involved in operation, fast start and stop, easy to realize automatic.
Power generation is stable and efficient
Sustainable returns over 25 years
What is your roof area?
What size system do you plan to build?
According to the provided roof area, the largest array of photovoltaic systems can be arranged
Provide the system installation guides after the system arrive
Because the fixed installation can not automatically track the sun's change of Angle like the tracking system, it needs to calculate the optimal inclination of the component arrangement according to the latitude to obtain the maximum solar radiation throughout the year and seek the maximum energy generation.
MULTIFIT: It is recommended to keep the best angle, so that the power generation rate will be high.
Core power panel, 25 years product quality and power compensation liability insurance.
Inverters provide five years of product quality and fault insurance.
The bracket is guaranteed for ten years.
Distributed photovoltaic systems can be installed anywhere there is sunlight.
Including rural areas, pastoral areas, mountainous areas, developing large, medium and small cities or buildings near the business district, the most widely used at present is the distributed photovoltaic grid project installed on the roof of buildings.Including schools, hospitals, shopping malls, villas, residents, factories, enterprises, car sheds, bus shelters and other roof which meet the load requirements of concrete, color steel plate and tile can be installed distributed PHOTOVOLTAIC power station.
The residential solar power system can be widely applied to the sloping roof, platform, carport and other places of the houses built by residents.
Model No. | System Capacity | Solar Module | Inverter | Installation Area | Annual energy output(KWH) | ||
Power | Quantity | Capacity | Quantity | ||||
MU-SGS5KW | 5000W | 285W | 17 | 5KW | 1 | 34m2 | ≈8000 |
MU-SGS8KW | 8000W | 285W | 28 | 8KW | 1 | 56m2 | ≈12800 |
MU-SGS10KW | 10000W | 285W | 35 | 10KW | 1 | 70m2 | ≈16000 |
MU-SGS15KW | 15000W | 350W | 43 | 15KW | 1 | 86m2 | ≈24000 |
MU-SGS20KW | 20000W | 350W | 57 | 20KW | 1 | 114m2 | ≈32000 |
MU-SGS30KW | 30000W | 350W | 86 | 30KW | 1 | 172m2 | ≈48000 |
MU-SGS50KW | 50000W | 350W | 142 | 50KW | 1 | 284m2 | ≈80000 |
MU-SGS100KW | 100000W | 350W | 286 | 50KW | 2 | 572m2 | ≈160000 |
MU-SGS200KW | 200000W | 350W | 571 | 50KW | 4 | 1142m2 | ≈320000 |
Module No. | MU-SPS5KW | MU-SPS8KW | MU-SPS10KW | MU-SPS15KW | MU-SPS20KW | MU-SPS30KW | MU-SPS50KW | MU-SPS100KW | MU-SPS200KW | |
Distribution Box | Essential internal components of the distribution box AC switch, photovoltaic reclosing; Lightning surge protection, grounding copper bar | |||||||||
Bracket | 9*6m C type steel | 18*6m C type steel | 24*6m C type steel | 31*6m C type steel | 36*6m C type steel | Need to design | Need to design | Need to design | Need to design | |
Photovotaic cable | 20m | 30m | 35m | 70m | 80m | 120m | 200m | 450m | 800m | |
Accessories | MC4 connector C type steel connecting bolt and screw | MC4 connector Connecting bolt and screw Medium pressure block edge pressure block |
Remarks:
The specifications are only used for the system comparison of different specifications. Multifit can also design different specifications according to the personalized needs of customers.
2009 Multifit Establis , 280768 Stock Exchange
12+Years in Solar Industry 20+CE Certificates
Multifit Green energy. Here let ou enjoy one-stop shopping. Factory direct delivery.
Package & Shipping
Batteries have high requirements for transportation.
For questions about sea transportation, air transportation and road transportation, please consult us.
Multifit Office-Our Company
HQ located in Beijing, China and founded in 2009 Our factory located in 3/F,JieSi Bldg.,6 Keji West Road,Hi-Tech Zone,Shantou,Guangdong,China.